COMPARATIVE STUDY OF FE (II)/PERSULFATE AND HEAT/PERSULFATE FOR THE REMOVAL OF ALCAIN BLUE /
GHISLAIN TAYUE TATSENGUEM; SUPERVISOR: ASSOC. PROF. DR. SIFA DOĞAN
- 49 sheets; 31 cm. Includes CD
Thesis (MSc) - Cyprus International University. Institute of Graduate Studies and Research Environmental Sciences Department
Includes bibliography (sheets 41-46)
ABSTRACT A significant environmental challenge is the efficient removal of organic pollutants from wastewater; in recent years, research on dye molecules' harmful effects on organisms, animals, and human health has increased significantly. Alcain Blue has been discovered to be helpful in determining protein based, bacteria staining, histochemical and electrophoretic staining, as well as a dye for fibroblasts. The decolourization of reactive dye solution was investigated in this work using ferrous and heat activated persulfate in water at three different temperatures (40°C, 60°C, and 80°C) of heat persulfate and dye/ferrous/persulfate ratios (1:1, 1:2:1, 1:1:1/2, and 1:4:1) within different intervals of time (0, 10, 30, 60, and 90mins). AB8GX concentration was observed at 50 mg/L at ambient pH The findings demonstrated that increasing temperature and persulfate concentration was beneficial for dye degradation, with decolourization efficiencies as high as 91% observed at 80°C temperature after 90 minutes of reaction at pH 3. The ratio 1:1:1 had decoloured after 90 minutes with a pH of 3 and 73.07%. Keywords: AB8GX, Activated Oxidation Processes (AOPs), Fe2+ Degradation, Heat, Heat/PS, Persulfate (PS) radicals